Name: NXL500 R6 - Amplifier Module
Brand: Holton Precision Audio
Price: 331.00 AUD
Availability: InStock

NXL500 R6 - Amplifier Module

£331.00

The NXL500 is designed as a very high performance, high end audio amplifier in the Recording Studio's, Audiophile Amplifier's, Home Theatre and Sub-Woofer Amplifier's

The NXL500 R6 has XLR Balanced inputs as standard and it can be configured for RCA single ended input.

The performance of this amplifier is truly awesome and unlike a lot of amplifiers these days. The power ratings are continuously rated sine wave into a resistive load.

The update includes a completely fresh PCB layout and some interesting design changes.

The latest iteration allows for a constant 2 ohm rating of up to 880 watts, with three pairs of dual die laterals in the output stage, and an additional MOSFET driver stage, improved interstage filtering and decoupling capacitors.

The new driver stage also improves the THD+N performance bringing it down to 0.0007% at 8 ohms 1 Watt.

THD+N Test @ 1 watt into 8 Ω

50Hz - 0.0007%

100Hz - 0.0009%

500Hz - 0.0015%

1Khz - 0.0028%

10Khz - 0.0036%

20Khz - 0.0064%

All power tests have been done of a 2KW variable voltage power transformer with 60,000uf per supply rail with the idle DC voltage set to +-80vdc and single channel driven only.

NXL500 R6 Specifications

300 Watts sine wave into 8 Ω
525 Watts sine wave into 4 Ω
880 Watts sine wave into 2 Ω
The NXL500 R6 is 1.5 Ω Stable
Biased into Class A/B
Power Bandwidth 3.5hz to 250khz -3dB
Damping Factor At 100hz 8Ω = 1300
RCA Single ended Input impedance 20kΩ
Differential Input Impedance = 40kΩ
Single Ended Input Gain = 22.6dB
Differential Input Gain = 25.6dB
SNR -110dB with respect to full power output
SNR - 90dB at 1 watt into 8 ohms
THD-N = 0.003% @ 8 Ohms 280 Watts
Recommended Linear Voltage Supply +-80 Volts DC
PSU Power Transformer secondary windings 55-60vac (1200VA min per channel)
Printed Circuit Board Dimensions 231mm x 78.5mm
Designed as high performance Home Theatre multi-channel amplifier
Or High End 2 Channel stereo amplifier
Unconditionally Stable into any load from 2 Ohm loads and up
Extra heavy duty two ounce copper printed circuit board
Rugged Dual Die Lateral MOSFET Output Stage

Basic list of parts needed to build a 1 x Mono Block NXV500L R6 Amplifier.

1 x HPA-NXL500 R6 Amplifier Module
1 x HPA-PSU Two R3 Power Supply Board
1 x HPA-MCU Power One R1 AC Mains Controller
1 x HPA-SS/Relay One
1 x 800VA toroidal transformer with 2 x 55VAC for 4 ohm loads
1 x 1200VA toroidal transformer with 2 x 60VAC for 2 Ohm loads
1 x Conrad MF35-151 heat sink Minimum